Filter

[dino Senior Member Find all posts View Profile Close dino]

For chemist: for filter AAS do you need a specific emulsions filter or a 0,45-0,22 filter is what you need? A friend of mine get "Millex GP" filter unit 0,22 Millipore Express PES Membrane. On the user guide is writed: "Do not use Millex filter unit to filter emulsion or suspensions because it was not designed for that purpose". Thanks bro!

[player Senior Member Find all posts View Profile Close player]

emulsion and solution have special filtering methods,0.22micron is good for the oils,wich is one component.Emulsion is at least two or more immiscible liquids,and after the filtering thru 0.22 is remain a part of one of the two,or more main liquids,is not good.
Suspension is a common water based liquid with the api microcristalls,same story,if the christalls not goin thru the filter you make nothing,just a liquid without the main ingredients...thats my opinion,if somebody knows better, no hesitate,just write it

Ps:if it's not a secret,what do you want to filtering?

[dino Senior Member Find all posts View Profile Close dino]

AAS...but it's not me, it's a friend of mine!!!! So you cannot filter water based AAS like Winny and TestSuspension but you can filter oily solution like injectable AAS'?

[player Senior Member Find all posts View Profile Close player]

yes,you can only oils,but it's not remove any bacteria,so this procedure is not 100%,but ask Ronny,he know the correct answer for your question...

[dino Senior Member Find all posts View Profile Close dino]

Thanks Player, i hope ronny will helps me...

[RonnyT Senior Member Find all posts View Profile Close RonnyT]

reason

I could not read from your post why you want to filter? Is it an existing product? If you have micronised powder TNE or stanozolol, you can opt to mix it cold, it has to be highly pure when you want to mix it like this. It will not be filtered and the bacteria are killed with 2% Benzyl Alcohol.
A pharmaceutical compound mostly runs 0,9% but is compounded in a clean room.

An other method is to melt the powder (at high temparatures) in PEG 400 en PS60 en filter it through a metal filter into water mixed with BA, this method is called titration. I have pictures of this filter at home I'll post them later.

Pictured: winny in oil experiments

[player Senior Member Find all posts View Profile Close player]

He allways help,if can,as you see ^^

[dino Senior Member Find all posts View Profile Close dino]

Thanks Ronny and to all!! my friend need to filter ready UG TrenA and others ready UG oils to sterilyze them and put the oil in a new sterile vial. Need he just to add BA? Can he filter through the Millipore filter suspensions like Winny? Thanks again bro!!
Time ago Ronny you ask to nandrolone fever, my friend get a little fever, 37,2 max from TigerBlood TrenAce, no complain with others TB products he like a pair of the orals. Now he woul?d like to filter the TrenAce and see the result. Maybe he get 19nor fever like you said in your thread. thanks again bros!!

[RonnyT Senior Member Find all posts View Profile Close RonnyT]

What I taste here that the oils are sent in a bulk jug. The vials should be sterilised just like the stoppers, best to use Ethanol. Then transfer the the oils into the vials using a syringe filter. http://www.researchsupply.net/filtration.html Let me know if I'm wrong and you have an other question.

[dino Senior Member Find all posts View Profile Close dino]

I'm speaking about 10ml vials of variuous Ug labs, so My friend would transfer the TrenA from the original 10ml vial to a new one to re-sterilize it, just to be sure that what he put in his butt is free of bacterias(maybe he need just to add BA to the TrenA, 0,5-1ml?).
What i thought was that the PES Millipore membrane will not able to filter oily solution like AAS, TrenA in this case. Like it's writed in the site you posted PEs membrane is not good to filter oil-based solution, better nylon or PVDF membranes. The main question is: is it possible to filter with PES mebrane AAS? Or the operation will be long, boring and not sure of the final result?
sorry if i'm not able to explane myself in a pair of words...like you see my english is not so good...thanks again Ronny and to all!!!

[RonnyT Senior Member Find all posts View Profile Close RonnyT]

This will answer your questions http://www.membrane-solutions.com/sy..._prefilter.htm 0,75% BA will kill all bacteria and fungus within 7 days, but 1 ml BA in 10 ml will cause much pain... ;-) 0,75 - 1 ml in 100 ml solution

[dino Senior Member Find all posts View Profile Close dino]

Thanks Ronny. Effectively 10%of BA it's a real kick in the ass

[nympholvr Member Find all posts View Profile Close nympholvr]

So Ronny I have a question. If your not too busy can you give some advice. Hypothetically I made a batch of fina into tren ace. The whatman filter really is a slow and tedious process. In your links above there are some filtration systems that I am curious if you have used them before. Hypothetically if I was gonna filter a batch of test 400 ie. 200 mg test cyp and 200 mg test en per ml what would be the best and fastest system to filter lets say 100 mls. ?