Got some Optimal Labs tren. It has crystals in it. Whats the deal with that? Is it safe? How do I get the crystals out? Appreciate the help, fellas.
Announcement
Collapse
No announcement yet.
Crystals in my tren
Collapse
X
-
I had the same thing brother. Heat up some water in a bowl to the point of boiling. Run the vials under luke warm faucet water so there is not a temp shock shock when putting them in the bowl of boiling water. place the vials and leave them there till the water starts to cool down too much( it should stay hot to touch at all times ) Shake the vials from time to time. You will start to notice that the crystal will dissolve. Do not be discouraged by the larger ones they will too disolve it just takes timeNever mistake kindness for weakness...
-
More than likely they will appear. Whoever compounded it either did not use enough solvent. I.e. BB or the raw they are using is not of the acetate ester or does not have an ester associated w/ it. Raw materials w/ no ester must be suspeded in aqueous form not oil based. Interested to see if u can draw those crystals into a 22/23 gauge.
Comment
-
Originally posted by MassWclass View PostMore than likely they will appear. Whoever compounded it either did not use enough solvent. I.e. BB or the raw they are using is not of the acetate ester or does not have an ester associated w/ it. Raw materials w/ no ester must be suspeded in aqueous form not oil based. Interested to see if u can draw those crystals into a 22/23 gauge.
Comment
-
Tren Ace has a tendency to crash. You could add 10% BB ( bennzl benzonate) to each vial if there is enough room in the vials and heat in an oven at 350F for 30 to 45 minutes. This temp won't be high enough to kill the hormone. This should keep it from crashing again in the future.
Just make sure you vent each vial with a pin to relieve pressure or they will explode in your oven.
Also, you would need to deduct 10% of the strength of the Tren....ie....if it's labeled at 100mg/ml, it will be 90mg/ml.
Comment
-
Well Tren Ace has a tendency to crash. You could add 10% BB ( bennzl benzonate) to each vial if there is enough room in the vials and heat in an oven at 350F for 30 to 45 minutes. This temp won't be high enough to kill the hormone. This should keep it from crashing again in the future Anyway..
Comment
Comment