Tweet
20-Minute Muscle Builder
by Christian Thibaudeau | 06/06/14
Here's what you need to know...
• You can build muscle and strength in as little as 20 minutes a day if you know what you're doing. Twenty minutes of well planned, focused training will lead to significant improvements in your physique and work capacity.
• This program only requires a barbell and, ideally, a bench. You'll only do four basic lifts. They're split over two training days and you'll go back and forth between them throughout the week.
If you have access to a barbell and have 20 minutes a day to spare, I can make you bigger and stronger. I have plenty of clients who work inhumane hours, yet all of them train 4 to 7 days a week and all are making significant progress. I'm fed up with people who make excuses not to train. I couldn't care less if someone doesn't want to hit the weights. To each his passion. However, I do get pissed off when someone complains about not being able to build a good physique because he doesn't have time or that he's too tired. If you really want it, stop being weak and make time to train.
The thing is, you don't need that much time to work out. You can build muscle and strength in as little as 20 minutes a day (or even less) if you know what you're doing. Twenty minutes of well planned, focused training will lead to significant improvements in your physique and work capacity. Tell me that you don't have 20 minutes to devote to training! Here's a very simple program that will get you stronger and more muscular if you give it all you've got.
The Program
The plan is very simple. It only requires a barbell and, ideally, a bench. We'll use four basic lifts only. They are split over two training days and you go back and forth between them throughout the week.
The lifts are:
1. Deadlift
2. Military Press
3. Bench Press
4. Bent-Over Barbell Row (torso kept parallel to the floor)
The groupings are as follows:
Workout A
A. Deadlift
B. Military press
Workout B
A. Bench press
B. Bent-Over Barbell Row
It's crucial that you know your maximum (1RM) on those four lifts. I don't want a sloppy max, either. I want the maximum amount of weight you can lift for a technically solid repetition. This maximum will be used to calculate the weights you will use on the first week. Then the loads will be adjusted depending on your results.
After warming up (2-3 warm-up sets at the most), do 4 total sets per exercise:
Set 1: 5 reps with 80% of your maximum
Set 2: 1 rep with 90% of your maximum
Set 3: 1 rep with 92% of your maximum
Set 4: The maximum number of reps you can do with 60% of your maximum. This number should fall between 15 and 20
The important part to remember is how to adjust the load from workout to workout. What determines if you can go up in weight at the next session is the result of the fourth set. It's simple: When you reach 20 reps on the fourth set, you go up in weight the next workout. Until you can reach 20 good reps, the load used for your 4 work sets remains unchanged.
For example, let's say that your workout looks like this:
5 @ 240 pounds
1 @ 270 pounds
1 @ 280 pounds
17 @ 180 pounds
You'd keep 240, 270, 280, and 180 pounds as your work set weights the next time this workout comes around. When you're able to hit 20 reps on that last set, you increase the weight in the following amounts:
Deadlift: 10 pounds for the first 3 sets, 20 pounds for the fourth set
Military Press: 5 pounds for the first 3 sets, 10 pounds for the fourth set
Bench Press: 5 pounds for the first 3 sets, 10 pounds for the fourth set
Bent-Over Barbell Row: 5 pounds for the first 3 sets, 10 pounds for the fourth set
For example, if your bench-press numbers look like this:
5 @ 240 pounds
1 @ 270 pounds
1 @ 280 pounds
20 @ 180 pounds
Then the next time you do bench, your weights would go to:
5 @ 245 pounds
1 @ 275 pounds
1 @ 286 pounds
Maximum number of reps @ 190 pounds
Frequency Is King
In my experience, training frequency is a lot more important than volume. This is especially true if you're using a very low volume/training time approach like this program. A lot of people ask if they can change exercises every workout. For example, instead of doing Workout A (deadlift/military press) three times during the week, they'll ask if they can do that workout just once and then use other movements like a squat, incline bench press, or barbell curl on the other sessions. No, you can't! The program simply will not work if you use different variations of the exercises at every workout.
You must progressively overload the same movement to force the body to adapt and build muscle.
It's simple:
Days 1, 3, and 5
Deadlift
Military Press
Days 2, 4, and 6
Bench Press
Bent-Over Barbell Row
Don't try to get cute. Simply work hard at pushing the weights up on those four lifts and you will grow.
How It Works
This program looks deceptively simple, but give it a shot for a month and you'll be shocked. If you work hard you will get everything you need to grow.
The sets using 80-92% of your max will activate the nervous system and make your muscles denser and harder looking. Those sets will also get you stronger. The set of 5 will also contribute to hypertrophy and the set of 20 will further stimulate hypertrophy.
The cool thing is that these workouts aren't draining and they could in fact be done even more frequently if you want to (e.g., Workout A in the AM and Workout B in the PM, every day) and you'd make fantastic gains without feeling fatigued.
Possible Adaptations
I typically don't like to stray away from my systems, but here are three ways you can adapt this system to different situations:
1. You can do a longer workout, but you can't get to the gym that often.
Let's say that you can spend 40-60 minutes per day on your training but that you can only hit the gym 3 days a week. Remember that frequency is king with this program – you want to hit each lift often. If you can only go to the gym 3 times a week, then you should do all four lifts at every workout. This will allow you to hit all four movements three times per week. The best order to do this is as follow:
1. Bench Press
2. Deadlift
3. Military Press
4. Bent-Over Row
2. You want to train twice a day.
I personally like to do multiple short sessions during the day. I feel that if you can afford to do that, you'll get the best possible gains. If you want to do this, perform the A workout in the AM as your first training session and the B workout in the PM as your second session.
3. You want to also get leaner.
I suggest adding Tabata kettlebell swings to the end of the workout. Simply do as many KB swings as you can in 20 seconds, rest 10 seconds, and then start the next round of 20 seconds. You do this for 4 minutes straight. A 20 or 24-kilogram kettlebell will be adequate for most guys while a 16-kilogram kettlebell should work for most women.
by Christian Thibaudeau | 06/06/14
Here's what you need to know...
• You can build muscle and strength in as little as 20 minutes a day if you know what you're doing. Twenty minutes of well planned, focused training will lead to significant improvements in your physique and work capacity.
• This program only requires a barbell and, ideally, a bench. You'll only do four basic lifts. They're split over two training days and you'll go back and forth between them throughout the week.
If you have access to a barbell and have 20 minutes a day to spare, I can make you bigger and stronger. I have plenty of clients who work inhumane hours, yet all of them train 4 to 7 days a week and all are making significant progress. I'm fed up with people who make excuses not to train. I couldn't care less if someone doesn't want to hit the weights. To each his passion. However, I do get pissed off when someone complains about not being able to build a good physique because he doesn't have time or that he's too tired. If you really want it, stop being weak and make time to train.
The thing is, you don't need that much time to work out. You can build muscle and strength in as little as 20 minutes a day (or even less) if you know what you're doing. Twenty minutes of well planned, focused training will lead to significant improvements in your physique and work capacity. Tell me that you don't have 20 minutes to devote to training! Here's a very simple program that will get you stronger and more muscular if you give it all you've got.
The Program
The plan is very simple. It only requires a barbell and, ideally, a bench. We'll use four basic lifts only. They are split over two training days and you go back and forth between them throughout the week.
The lifts are:
1. Deadlift
2. Military Press
3. Bench Press
4. Bent-Over Barbell Row (torso kept parallel to the floor)
The groupings are as follows:
Workout A
A. Deadlift
B. Military press
Workout B
A. Bench press
B. Bent-Over Barbell Row
It's crucial that you know your maximum (1RM) on those four lifts. I don't want a sloppy max, either. I want the maximum amount of weight you can lift for a technically solid repetition. This maximum will be used to calculate the weights you will use on the first week. Then the loads will be adjusted depending on your results.
After warming up (2-3 warm-up sets at the most), do 4 total sets per exercise:
Set 1: 5 reps with 80% of your maximum
Set 2: 1 rep with 90% of your maximum
Set 3: 1 rep with 92% of your maximum
Set 4: The maximum number of reps you can do with 60% of your maximum. This number should fall between 15 and 20
The important part to remember is how to adjust the load from workout to workout. What determines if you can go up in weight at the next session is the result of the fourth set. It's simple: When you reach 20 reps on the fourth set, you go up in weight the next workout. Until you can reach 20 good reps, the load used for your 4 work sets remains unchanged.
For example, let's say that your workout looks like this:
5 @ 240 pounds
1 @ 270 pounds
1 @ 280 pounds
17 @ 180 pounds
You'd keep 240, 270, 280, and 180 pounds as your work set weights the next time this workout comes around. When you're able to hit 20 reps on that last set, you increase the weight in the following amounts:
Deadlift: 10 pounds for the first 3 sets, 20 pounds for the fourth set
Military Press: 5 pounds for the first 3 sets, 10 pounds for the fourth set
Bench Press: 5 pounds for the first 3 sets, 10 pounds for the fourth set
Bent-Over Barbell Row: 5 pounds for the first 3 sets, 10 pounds for the fourth set
For example, if your bench-press numbers look like this:
5 @ 240 pounds
1 @ 270 pounds
1 @ 280 pounds
20 @ 180 pounds
Then the next time you do bench, your weights would go to:
5 @ 245 pounds
1 @ 275 pounds
1 @ 286 pounds
Maximum number of reps @ 190 pounds
Frequency Is King
In my experience, training frequency is a lot more important than volume. This is especially true if you're using a very low volume/training time approach like this program. A lot of people ask if they can change exercises every workout. For example, instead of doing Workout A (deadlift/military press) three times during the week, they'll ask if they can do that workout just once and then use other movements like a squat, incline bench press, or barbell curl on the other sessions. No, you can't! The program simply will not work if you use different variations of the exercises at every workout.
You must progressively overload the same movement to force the body to adapt and build muscle.
It's simple:
Days 1, 3, and 5
Deadlift
Military Press
Days 2, 4, and 6
Bench Press
Bent-Over Barbell Row
Don't try to get cute. Simply work hard at pushing the weights up on those four lifts and you will grow.
How It Works
This program looks deceptively simple, but give it a shot for a month and you'll be shocked. If you work hard you will get everything you need to grow.
The sets using 80-92% of your max will activate the nervous system and make your muscles denser and harder looking. Those sets will also get you stronger. The set of 5 will also contribute to hypertrophy and the set of 20 will further stimulate hypertrophy.
The cool thing is that these workouts aren't draining and they could in fact be done even more frequently if you want to (e.g., Workout A in the AM and Workout B in the PM, every day) and you'd make fantastic gains without feeling fatigued.
Possible Adaptations
I typically don't like to stray away from my systems, but here are three ways you can adapt this system to different situations:
1. You can do a longer workout, but you can't get to the gym that often.
Let's say that you can spend 40-60 minutes per day on your training but that you can only hit the gym 3 days a week. Remember that frequency is king with this program – you want to hit each lift often. If you can only go to the gym 3 times a week, then you should do all four lifts at every workout. This will allow you to hit all four movements three times per week. The best order to do this is as follow:
1. Bench Press
2. Deadlift
3. Military Press
4. Bent-Over Row
2. You want to train twice a day.
I personally like to do multiple short sessions during the day. I feel that if you can afford to do that, you'll get the best possible gains. If you want to do this, perform the A workout in the AM as your first training session and the B workout in the PM as your second session.
3. You want to also get leaner.
I suggest adding Tabata kettlebell swings to the end of the workout. Simply do as many KB swings as you can in 20 seconds, rest 10 seconds, and then start the next round of 20 seconds. You do this for 4 minutes straight. A 20 or 24-kilogram kettlebell will be adequate for most guys while a 16-kilogram kettlebell should work for most women.