Announcement

Collapse
No announcement yet.

Few Questions about HCG

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Few Questions about HCG

    I have the HCG (Pregnyl) from Naps, the one from Organon, Greece. It's the second one if you search for HCG in the quick find bar on Naps.

    1.) Even if you are injecting a small amount, say 250/500IU's, is it still to be injected intramuscular?
    2.) Once the solution is mixed, and if you mix it all at once, how do you know the dosages?

    I know these are probably self explanatory questions, I'm mainly just concerned about the dosages. I believe it is to be injected IM but not sure how to dose it correctly.

    Thanks for any help!

  • #2
    If you mix the 5000iu of HCG with 10ml of bacteriostatic water then a .5ml shot will give you 250iu. I usually use an insulin needle and go intramuscular. I believe most people go subcutaneous though. After mixing keep in fridge. They say it last about 60 days. 50 units on an insulin needle is equal to .5ml. Twice a week would give you 500iu total. Look online for mixing instructions.
    sigpic

    Comment


    • #3
      Check out youtube for video directions. Punch in HCG administration and you'll get several good videos showing u how to do it. Make sure you have everything before you get started.
      Mighty49er
      Senior Member
      Last edited by Mighty49er; 05-24-2012, 07:31 PM.
      "Stop Crying and Lift!!!!!"

      Comment


      • #4
        you can also use www.peptidecalculator.com
        Satisfaction Is the Death of Desire

        Comment


        • #5
          Mixing HCG with Bacteriostatic Water
          What you need:
          1. 5000iu HCG
          2. 10ml Bac Water
          3. Sterile 10ml vial
          4. regular sterile syringe
          5. 20 insulin syringes

          -Take your syringe and draw up 1cc of bacteriostatic water (make sure you wiped the top of the vial with alcohol) and inject it into the amp. Do not let the needle get dirty. Gently swirl the water around until all the powder is dissolved.

          - Then use the same syringe and suck up all the HCG solution and inject it into the sterile vial.

          -Then using the same syringe draw up another 9cc of bacteriostatic water and inject it into the sterile vial. Swirl the water around for a minute. You now have your solution made at 500iu per milliliter. This is convent because 250iu is easily measured by the .5cc mark on a insulin syringe.

          -To change the concentration simple adjust the amount of water. For instance if you wanted 250iu for each .25cc then you would use 5ml of water.

          - Now take the 20 insulin syringes and draw up 1/2cc from the vial with each one. Put them in a container and place in the refrigerator away from the light.

          Injecting HCG

          - Pinch a fold of skin in your mid-belly area or love handle area between thumb and forefinger with your left hand and wipe with alcohol pad to clean the skin. With your right hand insert the insulin needle into the fold of skin at a diagonal, downward angle.

          - IM muscular injections of fast acting water based products such as GH, HCG, Slin, Vit B-12, etc have an absorbtion rate of 57% verses Sub-Q which is 69%

          Comment


          • #6
            Originally posted by schlaffer View Post
            Mixing HCG with Bacteriostatic Water
            What you need:
            1. 5000iu HCG
            2. 10ml Bac Water
            3. Sterile 10ml vial
            4. regular sterile syringe
            5. 20 insulin syringes

            -Take your syringe and draw up 1cc of bacteriostatic water (make sure you wiped the top of the vial with alcohol) and inject it into the amp. Do not let the needle get dirty. Gently swirl the water around until all the powder is dissolved.

            - Then use the same syringe and suck up all the HCG solution and inject it into the sterile vial.

            -Then using the same syringe draw up another 9cc of bacteriostatic water and inject it into the sterile vial. Swirl the water around for a minute. You now have your solution made at 500iu per milliliter. This is convent because 250iu is easily measured by the .5cc mark on a insulin syringe.

            -To change the concentration simple adjust the amount of water. For instance if you wanted 250iu for each .25cc then you would use 5ml of water.

            - Now take the 20 insulin syringes and draw up 1/2cc from the vial with each one. Put them in a container and place in the refrigerator away from the light.

            Injecting HCG

            - Pinch a fold of skin in your mid-belly area or love handle area between thumb and forefinger with your left hand and wipe with alcohol pad to clean the skin. With your right hand insert the insulin needle into the fold of skin at a diagonal, downward angle.

            - IM muscular injections of fast acting water based products such as GH, HCG, Slin, Vit B-12, etc have an absorbtion rate of 57% verses Sub-Q which is 69%
            ^^pretty much sums it up

            Comment

            Working...
            X