Tweet
from the net basics for priming
Frequently, athletes research how to better layout an anabolic-androgenic steroid cycle, as well as proper post cycle therapy for making the transition back to a natural training state. Unfortunately, many neglect another component for a successful AAS cycle: maximizing the time spent on using pre-cycle therapy, better know as “priming.”
What is priming?
Priming is a preparatory method used to create a favorable growth environment so an AAS cycle can maximize muscle gains. The goal of priming is to make an athletes system very sensitive to increased calories, greater training intensity and elevated anabolic hormones. Psychologically, a trainee should feel pent up and ready to move heavy loads.
Priming should be done before every cycle – no matter the athlete’s previous AAS cycle experience. If completed correctly, priming will lead to very quick and dramatic results. Because of the faster results, cycle duration can also be cut back to make coming off and restoring proper hypothalamic-pituitary-testicular axis functioning easier, for a faster recovery of the body’s endogenous androgen production.
How should you prime?
Priming involves correct dietary and training manipulations that allow an athlete to lower body fat while sparing muscle. Basically, it is essential to diet down slow enough to simply lose fat – again, no muscle or strength should be lost.
Bodybuilders spend a lot of time preparing to exhibit a lean, muscular build. But other things are going on inside. Their body is getting really sensitive for a period of growth following the long period of dieting and depletion training. Most advanced bodybuilders – especially those that compete – know how responsive the body can be right after leaning up; such as the growth spurts frequently experienced after a competition with or without concurrent AAS administration. This is an example of what occurs by priming before a bulking phase, although pre-contest routines are generally too exhaustive since extremely low body fat levels are required. Simply put: priming opens the window for a great opportunity to obtain phenomenal muscle building results and end training plateaus.
Training cycles must change as goals change. While priming, the training should not be so intense that overtraining is likely; in fact, a general maintenance routine would be best in many circumstances. The training routine should also let the athlete mentally prepare for a split that is very progressive. The amount of aerobic training (as well a total calorie intake) is determined by current lean body mass and what has previously been learned about personal metabolism and limitations. The concurrent aerobic and anaerobic training effect won’t limit results since the goal is not to gain strength or muscle but rather to preserve it.
The diet should allow the body to become sensitive to carbohydrates and the other macronutrients. Generally, a cyclic-ketogenic diet works wonders. This method helps many lose fat while preserving lean body mass while becoming carbohydrate sensitive for superior calorie partitioning once the AAS cycle begins.
It is very catabolic to train with no carbohydrate intake and no scheduled carbohydrate loads; lost muscle is inevitable. Why take two steps back and then two steps forward every time you cycle? Scheduling carbohydrate loads presents an opportunity to fill out energy stores for a productive – and frequently progressive – power workouts, opportunities to fight for strength levels and muscle mass.
Using a CKD approach, carbohydrates remain very low for three or four days – maximum – followed by a “carb up,” a period where carbohydrate intake is substantial. Remember, glycogen levels must become grossly depleted during the weekly rotation to ensure the proper response from a carbohydrate load. Be careful of total calorie intake – results gained by obtaining low carbohydrate can be diverted if total calorie intake is too high; this can negatively affect the depletion phase.
After successfully depleting glycogen levels, a subsequent carb up can not only replenish glycogen depots but super compensate them. Stick to high-protein and high-carbohydrate food sources during the carbohydrate load. Total calorie intake during this period can be very high – some can eat well over 6,000 calories and still burn fat! Any high-fat cravings should be curbed within the first several hours of the carbohydrate load. Studies show fat gain during this time is very low since the body is more interested in replenishing itself than it is in storing fat. As you advance through the carbohydrate load, high fat foods are more likely to be stored as fat.
Regardless, carbohydrate loading will cause dramatic increases in bodyweight, though this is not suggestive of regaining fat. Weight fluctuations vary based on the athletes lean body mass. It is common for many to re-gain six to 10 pounds after a carbohydrate load due; much of this is due to the concurrent water uptake required to store the excess supply of glycogen. During the depletion week, it is common for many to lose seven to 12 pounds – roughly netting one or two pounds of fat loss per week with the rest of the weight composed mostly of dropped water.
The carbohydrate load also provides a key opportunity to train heavy and possibly make some gains in limit strength. A succeeding power training day is a great opportunity to accurately gauge muscle wasting or drops in limit strength. An abbreviated full body workout can be used with great success. All of the lifts should stay strong or possibly get stronger – use a workout journal!
The last four or five days before the cycle starts should be low carbohydrate. The steroid cycle should commence on the same day as a carbohydrate load. Testosterone and most of its popular derivatives will make this carbohydrate load very effective. Glycogen super compensation can occur very quickly, especially if short-ester (suspension, acetate, propionate) steroids are used; otherwise, front load longer esters (enanthate, cypionate, decanoate) to get blood levels up quickly.
Here is an example split for successful priming (based on Ultimate Diet 2.0 by Lyle McDonald, which is considered an up-to-date version of Underground Bodyopus by Daniel Duchaine):
Day 1: Moderate Carb/Cardio at maintenance calorie intake.
Day 2: Low Carb/Upperbody Supersets at a caloric deficit, either through diet or cardio.
Day 3: Low Carb/Lowerbody Supersets at a caloric deficit, either through diet or cardio.
Day 4: Low Carb/Cardio at a caloric deficit, either through diet or cardio.
Day 5: Low Carb/Full Body Workout with daytime calorie intake should be slightly less than they were during the previous days. The carbohydrate load should follow immediately after evening training.
Day 6: Carb Load/No training
Day 7: Moderate Carb/Power Training (Squats, Deadlifts and Bench Presses), eating slightly above maintenance.
Repeat
Once the cycle has begun, your body will remain very responsive and you should begin training hard; using supersets, drop sets, rest-pause – heavy and intense training. You should feel pent up and ready for it. As always, a training log will help maximize the growth window.
Frequently, athletes research how to better layout an anabolic-androgenic steroid cycle, as well as proper post cycle therapy for making the transition back to a natural training state. Unfortunately, many neglect another component for a successful AAS cycle: maximizing the time spent on using pre-cycle therapy, better know as “priming.”
What is priming?
Priming is a preparatory method used to create a favorable growth environment so an AAS cycle can maximize muscle gains. The goal of priming is to make an athletes system very sensitive to increased calories, greater training intensity and elevated anabolic hormones. Psychologically, a trainee should feel pent up and ready to move heavy loads.
Priming should be done before every cycle – no matter the athlete’s previous AAS cycle experience. If completed correctly, priming will lead to very quick and dramatic results. Because of the faster results, cycle duration can also be cut back to make coming off and restoring proper hypothalamic-pituitary-testicular axis functioning easier, for a faster recovery of the body’s endogenous androgen production.
How should you prime?
Priming involves correct dietary and training manipulations that allow an athlete to lower body fat while sparing muscle. Basically, it is essential to diet down slow enough to simply lose fat – again, no muscle or strength should be lost.
Bodybuilders spend a lot of time preparing to exhibit a lean, muscular build. But other things are going on inside. Their body is getting really sensitive for a period of growth following the long period of dieting and depletion training. Most advanced bodybuilders – especially those that compete – know how responsive the body can be right after leaning up; such as the growth spurts frequently experienced after a competition with or without concurrent AAS administration. This is an example of what occurs by priming before a bulking phase, although pre-contest routines are generally too exhaustive since extremely low body fat levels are required. Simply put: priming opens the window for a great opportunity to obtain phenomenal muscle building results and end training plateaus.
Training cycles must change as goals change. While priming, the training should not be so intense that overtraining is likely; in fact, a general maintenance routine would be best in many circumstances. The training routine should also let the athlete mentally prepare for a split that is very progressive. The amount of aerobic training (as well a total calorie intake) is determined by current lean body mass and what has previously been learned about personal metabolism and limitations. The concurrent aerobic and anaerobic training effect won’t limit results since the goal is not to gain strength or muscle but rather to preserve it.
The diet should allow the body to become sensitive to carbohydrates and the other macronutrients. Generally, a cyclic-ketogenic diet works wonders. This method helps many lose fat while preserving lean body mass while becoming carbohydrate sensitive for superior calorie partitioning once the AAS cycle begins.
It is very catabolic to train with no carbohydrate intake and no scheduled carbohydrate loads; lost muscle is inevitable. Why take two steps back and then two steps forward every time you cycle? Scheduling carbohydrate loads presents an opportunity to fill out energy stores for a productive – and frequently progressive – power workouts, opportunities to fight for strength levels and muscle mass.
Using a CKD approach, carbohydrates remain very low for three or four days – maximum – followed by a “carb up,” a period where carbohydrate intake is substantial. Remember, glycogen levels must become grossly depleted during the weekly rotation to ensure the proper response from a carbohydrate load. Be careful of total calorie intake – results gained by obtaining low carbohydrate can be diverted if total calorie intake is too high; this can negatively affect the depletion phase.
After successfully depleting glycogen levels, a subsequent carb up can not only replenish glycogen depots but super compensate them. Stick to high-protein and high-carbohydrate food sources during the carbohydrate load. Total calorie intake during this period can be very high – some can eat well over 6,000 calories and still burn fat! Any high-fat cravings should be curbed within the first several hours of the carbohydrate load. Studies show fat gain during this time is very low since the body is more interested in replenishing itself than it is in storing fat. As you advance through the carbohydrate load, high fat foods are more likely to be stored as fat.
Regardless, carbohydrate loading will cause dramatic increases in bodyweight, though this is not suggestive of regaining fat. Weight fluctuations vary based on the athletes lean body mass. It is common for many to re-gain six to 10 pounds after a carbohydrate load due; much of this is due to the concurrent water uptake required to store the excess supply of glycogen. During the depletion week, it is common for many to lose seven to 12 pounds – roughly netting one or two pounds of fat loss per week with the rest of the weight composed mostly of dropped water.
The carbohydrate load also provides a key opportunity to train heavy and possibly make some gains in limit strength. A succeeding power training day is a great opportunity to accurately gauge muscle wasting or drops in limit strength. An abbreviated full body workout can be used with great success. All of the lifts should stay strong or possibly get stronger – use a workout journal!
The last four or five days before the cycle starts should be low carbohydrate. The steroid cycle should commence on the same day as a carbohydrate load. Testosterone and most of its popular derivatives will make this carbohydrate load very effective. Glycogen super compensation can occur very quickly, especially if short-ester (suspension, acetate, propionate) steroids are used; otherwise, front load longer esters (enanthate, cypionate, decanoate) to get blood levels up quickly.
Here is an example split for successful priming (based on Ultimate Diet 2.0 by Lyle McDonald, which is considered an up-to-date version of Underground Bodyopus by Daniel Duchaine):
Day 1: Moderate Carb/Cardio at maintenance calorie intake.
Day 2: Low Carb/Upperbody Supersets at a caloric deficit, either through diet or cardio.
Day 3: Low Carb/Lowerbody Supersets at a caloric deficit, either through diet or cardio.
Day 4: Low Carb/Cardio at a caloric deficit, either through diet or cardio.
Day 5: Low Carb/Full Body Workout with daytime calorie intake should be slightly less than they were during the previous days. The carbohydrate load should follow immediately after evening training.
Day 6: Carb Load/No training
Day 7: Moderate Carb/Power Training (Squats, Deadlifts and Bench Presses), eating slightly above maintenance.
Repeat
Once the cycle has begun, your body will remain very responsive and you should begin training hard; using supersets, drop sets, rest-pause – heavy and intense training. You should feel pent up and ready for it. As always, a training log will help maximize the growth window.
Comment