pin size

[BADSEED1976 Senior Member Find all posts View Profile Close BADSEED1976]

has anyone ever tried pinning with a 28gauge pin???

[bill2011 Senior Member Find all posts View Profile Close bill2011]

I use 23g go in easy lol

[BADSEED1976 Senior Member Find all posts View Profile Close BADSEED1976]

I use 23g go in easy lol

thats what i use... NORMALLY.... but im out and my new pins not in yet so a friend had these?????

[MrBig Senior Member Find all posts View Profile Close MrBig]

Your may not get the gear through a pin that small, if you can it will take a long time.

[xela1988 Banned Find all posts View Profile Close xela1988]

smallest i've used is 25g. what are u pinning? I would imaging oils are hard to suck up and push out with that small of a gauge. might be good for water based like winny

[BADSEED1976 Senior Member Find all posts View Profile Close BADSEED1976]

test e and EQ.... that is what im afraid of... not getting the oil out

[2soups Junior Member Find all posts View Profile Close 2soups]

smallest i used on oil based was 25g

[ODB Senior Member Find all posts View Profile Close ODB]

Once in a pinch I used a slin pin (delt) it worked ok for 1 time. - took forever

[BADSEED1976 Senior Member Find all posts View Profile Close BADSEED1976]

Once in a pinch I used a slin pin (delt) it worked ok for 1 time. - took forever

thats what they are - so i skipped pinning last night... i know bad right... but my real pins should be at house today if not i need to shoot 4 insulin needles tonight... i never shoot anywhere other then the glute??? all four in the shoulders? 2 each side??

[ds222 Senior Member Find all posts View Profile Close ds222]

just remember to press slow, its easy to blow out the syringe when you have a thick oil trying to get through that small ass nedle

[biggie Senior Member Find all posts View Profile Close biggie]

when I run out of pins I go to my local walmart and buy some 25g 1in pins from the pharmacy. It's not illegal to buy pins? I tell them if they ask that I work on fishing reels and need to oil up the reels. Lol I pin in the quad with the 1 in.

[Mighty49er Senior Member Find all posts View Profile Close Mighty49er]

I use 25g 1 for everywhere.

[BADSEED1976 Senior Member Find all posts View Profile Close BADSEED1976]

when I run out of pins I go to my local walmart and buy some 25g 1in pins from the pharmacy. It's not illegal to buy pins? I tell them if they ask that I work on fishing reels and need to oil up the reels. Lol I pin in the quad with the 1 in.

that really works?

[biggie Senior Member Find all posts View Profile Close biggie]

yeah it sure does. You can't go in there and ask for 100, but you know a few to get you through. They take down your name, but so what.

[sam1976 Senior Member Find all posts View Profile Close sam1976]

personally, i havent used anything shorter than a 25. i will say, i've found that the shorter the pin, the easier the oil moves through it. for instance, when i use a 25g 5/8 in pin, it moves much faster than 1.5 in 25g. so you might have more luck with a shorter pin. i have heard of guys using inslin pins. when i've asked about it, they're just said it take a long time to push it in.