Announcement

Collapse
No announcement yet.

anavar - prednisolone

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • anavar - prednisolone

    Some IR spectra, one of my friends posted this in our closed forum:

    here are the spectra I thought it was HPLC but these are infrared spectroscopy it looks for functional groups.

    I asked him, since im unfamiliar with IR, how he calls purity on these and what distinguishes var from let’s say DHT, he told me he has saved reference spectra to match up and also looks for obvious functional groups such as Fluorine group in halo or hydroxyl methyl dienone group on drol or funky looking stanozolol, he also has access to MS/GC and HPLC

    HPLC will be used if he knows its deca or tren because those two look similar on IR, he knows what he is doing and again for drug discovery this what he has to do all day. He's not biased in anyway.

    I will get more spectra such as halo and primo from him, these are IR spectra on var and prednisolone

    So I ran all the samples, and I can provide spectra if desired.

    >Samples 5,6and 7 are all anavar, and from the same batch as best I can tell. About 96%pure
    Sample 8 is your Prednisolone, about 97.5% pure."
    Attached Files

  • #2
    I am just curious about the purity, did he run some standards to compare ?

    there are a lot of other peaks which indicate presence of other chemicals.

    Comment


    • #3
      Originally posted by RonnyT View Post
      Some IR spectra, one of my friends posted this in our closed forum:

      here are the spectra I thought it was HPLC but these are infrared spectroscopy it looks for functional groups.

      I asked him, since im unfamiliar with IR, how he calls purity on these and what distinguishes var from let’s say DHT, he told me he has saved reference spectra to match up and also looks for obvious functional groups such as Fluorine group in halo or hydroxyl methyl dienone group on drol or funky looking stanozolol, he also has access to MS/GC and HPLC

      HPLC will be used if he knows its deca or tren because those two look similar on IR, he knows what he is doing and again for drug discovery this what he has to do all day. He's not biased in anyway.

      I will get more spectra such as halo and primo from him, these are IR spectra on var and prednisolone

      So I ran all the samples, and I can provide spectra if desired.

      >Samples 5,6and 7 are all anavar, and from the same batch as best I can tell. About 96%pure
      Sample 8 is your Prednisolone, about 97.5% pure."
      What you tested that revealed prednisolone?

      Comment


      • #4
        I'll post a few extra Ir cause one of moderators would like to look at them

        primo e
        halo
        and bad mast E
        he points out why that extra peak is causing cloudy Mast E.

        looks like IR is bad ass for ID
        and again I asked him about purity call out, he said he has ref spectra for all of these to call out % purity and even has spectra saved for bad raws. he says solvents are not being removed.
        he can also do HPLC and GC/MS
        Attached Files

        Comment


        • #5
          Thanks for the post brother.

          Comment

          Working...
          X